|
Name
|
|
Skim-Kote
|
|
|
|
|
|
Type
|
|
One-Component
Polymer-Modified Concrete Finisher |
|
|
|
|
|
Application
Method
|
|
Trowel
applied. |
|
|
|
|
|
Product
Overview
|
|
 Skim-Kote
is a polymer-modified portland cement based concrete finishing material
designed to give a smooth, dense surface and superior life compared
to gypsum-based fillers. |
|
|
|
|
|
Benefits
|
|
- Eliminates
the need for concrete rubbing.
- Tenacious
bond, excellent durability and impact strength.
- Long life,
with excellent resistance to freeze-thaw, weathering and UV damage.
- Finely graded
aggregates allow very thin applications.
- Simple application
with trowel.
- Mixes easily
with clean water.
- Polymer is
proportioned in package for consistent quality.
- Non-re-emulsifiable.
- Economical.
- VOC compliant,
non-toxic.
|
|
|
|
|
|
Placement
and
Substrates
|
|
Apply
as a finish to concrete surfaces, above and below grade, interior
and exterior. |
|
|
|
|
|
Examples
of Use
|
|
Recommended
uses include finishing cast-in-place concrete, pre-cast concrete,
and tilt-up walls. Skim-Kote fills "bug holes" and other minor surface
defects to achieve a smooth, dense, long-lasting surface. Major patching
and leveling should be done with Merlex Super Concrete Patch before
application. |
|
|
|
|
|
Components
and Storage
|
|
Skim-Kote
is available in 50 lb. (22.68 kg) pails and bags. Stretch wrapping
available. Must be kept in dry storage area. Shelf life is six month
if properly stored. |
|
|
|
|
Coverage
|
|
50
lbs. (22.68 kg) of Skim-Kote will cover approximately 150 to 175 sq.
ft. (13.8 to 16.1 m3) at 1/32" (1.8mm) thickness. Coverage will vary
depending on concrete surface, application procedures and job site
conditions. |
|
|
|
|
|
Surface
Preparation
|
|
All receiving
surfaces must be structurally sound, clean, free of loose or deteriorated
materials, dust, dirt, form release agents or any other contaminant
which could hinder bonding ability. Major repairs and patch work
should be completed prior to application. Skim-Kote is not designed
to be a leveling material; use Merlex Super Concrete Patch. The
receiving surface should be lightly dampened with clean water, so
it is saturated surface dry (SSD) with no standing water.
|
| |
|
|
|
Mixing
|
|
Approximately
7.25 quarts (6.9 ltr) of clean, potable water are required for each
50 lbs. (22.68 kg) of Skim-Kote. Skim-Kote should be mechanically
mixed with slow speed drill motor and paddle to produce a smooth,
workable consistency. Do not over water product. Mixing time should
not exceed 90 seconds. Do not re-temper. Note: During
hot/dry weather use ice water for mixing for longer working life.
|
|
|
|
|
|
Application
|
|
Skim-Kote should
be evenly troweled to the substrate with enough pressure to ensure
tight contact and the filling of pores and voids. Immediately double
back with a second coat prior to final troweling, achieving a total
average thickness of 1/32" (1.8mm). Avoid unnecessary build-ups,
which can cause shrinkage or crack-checking. For final troweling,
lightly mist with clean water and trowel to a smooth, dense surface.
After material has sufficiently hardened, a fine water mist can
be used for moist curing.
|
|
|
|
|
|
Clean
Up
|
|
After
completing work, clean all mixing equipment and application tools
immediately with water. During application, protect surrounding areas
from spills and splatters. |
|
|
|
|
|
Limitations
|
|
Do
not use when temperature exceeds 100° F (39° C) or will fall below
40° F (4° C) within 24 hours of application. Do not apply to frost
filled areas. Do not exceed 1/8" (3 mm) total thickness. Do not use
over painted or gypsum-based surfaces. During periods of hot/dry or
windy weather conditions, moist curing is necessary to prevent premature
dryout. For professional use only.
|
|
|
|
|
|
Warranty
|
|
Skim-Kote
Concrete Finishing Material is warranted to perform in accordance
with the product specification when used according to application
instructions on the label. This warranty is limited and shall not
exceed the total amount paid by the buyer for the product. In no event
will Merlex Stucco, Inc. be liable for loss of profits, special or
consequential damages in respect to any claim. The foregoing warranties
are in lieu of all other warranties express or implied including those
concerning fitness for a particular use. |
|
|
|
|
|
Environmental
& Safety
|
|
Skim-Kote
contains portland cement and is alkaline on contact with water. May
be irritating to eyes and skin. Wear appropriate dust, skin, and eye
protection. In case of eye contact, flush immediately with water,
consult a physician. Wash hands with soap and water after use and
before eating. Keep out of reach of children. |
| |
|
|
|
Material
Standards
|
|
Portland
Cement: UBC 24-3 Silicia Sand: ASTM C-144 |
| |
|
|
